Front fender splash guard bracket

[Dennis P. DiBari]

Hi Jason,

     I am looking to purchase a front fender splash guard bracket for my 1964 Series 62 - passenger side.  I saw your post from a few years back with the picture you posted.  Anywhere I can get this part?

Dennis DiBari, Cottekill, NY

[Jason Edge]

Is this the front lower bumper end splash apron bracket that is behind the splash apron seen below?  It runs diagonally across the front lower bumper end and has one splash apron attachment point in center for bottom section of the splash apron.
If so, let me know left or right?   If not, let me know which splash apron with a picture or more descripion.

[Dennis P. DiBari]

Hi Jason,

     THANK YOU for sending me the picture of the apron.  That is the exact bracket you described and it is for the passenger side of my 1964 Series 62.  If you have any leads it would be most appreciated!  Thank you again.  Dennis DiBari

[Jason Edge]

I checked and have one right side that has some corrosion but solid enough to support the masticated rubber splash apron.  You could also use it as a template to make a better one out of a piece of new steel. 

Price is $10 ($7.50 with Chapter Discount). If you need cadmium plated original 2 bolts and 2 nuts to secure to lower bumper end add $5.  I can ship for $10 for a total of $17.50 (bracket only) or $22.50 bracket and fasteners.

[Dennis P. DiBari]

Hi Jason,

     I want to thank you for researching this for me and I would like to purchase the bracket and fasteners for the $20.50.  Please let me know the payment arrangements and I'll provide you with this immediately!  Thanks for looking into this.  I know you have been on the road the past few weeks!

Dennis DiBari

[Jason Edge]

Dennis, Send PayPal to email [e-mail]. If you don't have PayPal I can send you an invoice so you can pay with credit or debit card.
Jason

[Dennis P. DiBari]

Hi Jason,

     I don't have Pay Pal, so if you can send an invoice, I can pay with credit card or check for the items.  I'll send you an email with some information if that helps.

Thank You, Dennis

[Dennis P. DiBari]

Jason,

     Thank you for helping me acquire this part for my 64 - Series 62.  I really appreciate it!

Dennis DiBari