Front fender splash guard bracket
Hi Jason,
I am looking to purchase a front fender splash guard bracket for my 1964 Series 62 - passenger side. I saw your post from a few years back with the picture you posted. Anywhere I can get this part?
Dennis DiBari, Cottekill, NY
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
Is this the front lower bumper end splash apron bracket that is behind the splash apron seen below? It runs diagonally across the front lower bumper end and has one splash apron attachment point in center for bottom section of the splash apron.
If so, let me know left or right? If not, let me know which splash apron with a picture or more descripion.
-
Permalink Reply by Dennis P. DiBari on
-
Hi Jason,
THANK YOU for sending me the picture of the apron. That is the exact bracket you described and it is for the passenger side of my 1964 Series 62. If you have any leads it would be most appreciated! Thank you again. Dennis DiBari
-
-
I checked and have one right side that has some corrosion but solid enough to support the masticated rubber splash apron. You could also use it as a template to make a better one out of a piece of new steel.
Price is $10 ($7.50 with Chapter Discount). If you need cadmium plated original 2 bolts and 2 nuts to secure to lower bumper end add $5. I can ship for $10 for a total of $17.50 (bracket only) or $22.50 bracket and fasteners.
-
-
Hi Jason,
I want to thank you for researching this for me and I would like to purchase the bracket and fasteners for the $20.50. Please let me know the payment arrangements and I'll provide you with this immediately! Thanks for looking into this. I know you have been on the road the past few weeks!
Dennis DiBari
-
-
Dennis, Send PayPal to email jasonedge64@outlook.com. If you don't have PayPal I can send you an invoice so you can pay with credit or debit card.
Jason
-
-
Hi Jason,
I don't have Pay Pal, so if you can send an invoice, I can pay with credit card or check for the items. I'll send you an email with some information if that helps.
Thank You, Dennis
-
-
Jason,
Thank you for helping me acquire this part for my 64 - Series 62. I really appreciate it!
Dennis DiBari
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 1 hour ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
