Momentous day today!!!! Brought my De Ville home today. I had my transmission rebuilt at a local transmission shop. Old soul working there that knows Hydramatic Transmissions. All the leaks repaired, new clutch plates and seals, filter, fluid and he replaced the torque converter. AND, he painted it for me! I also had the transmission lines replaced.
Wish I had more time to drive today but I managed about 50 miles of highway and city driving! First time the ole girl was on the street in over 15 years.It sure felt good!
Those that kept me off the edge of the cliff the other day when I couldn't get the water pump to crossover connection to seal, thank you! Two O-rings and a little blue RTV did the trick!
Tags:
Hi Scott,
Congratulations!!! It is a great feeling and glad you got that rebuilt. Hopefully all the water leaks are good and happy driving. As an original owner, we both know the feeling of driving it!!!!!
Dennis DiBari, Cottekill, NY
Thanks Dennis. I'm pretty sure the coolant leaks are fixed. Like I wrote, I put about 50 miles on the car and a good chunk of that was highway. I kept an eye on the temperature gauge. When I got her home, nothing dripping, no funny odor, and the upper radiator hose was nice and firm. System was holding pressure!
Hoping for the sky here to clear. We're getting lots of cloud cover and chances of rain. Some remnants of hurricane Helena ruining things. Maybe I'll get the top down soon!!
Scott,
Great news and no leaks! When the sun comes out after Helena, top down and another spin!
Dennis DiBari
Scott,
As Jason said, the engine looks great. It must run great as well!
Dennis DiBari
Travis J. Hensley Online
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 1 hour ago. 1 Reply 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Started by tim sparks in General Discussion 2 hours ago. 0 Replies 0 Likes
anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue
Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 10 hours ago. 1 Reply 0 Likes
Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark 17 hours ago. 13 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by