I have a 63 cadillac park avenue. My bulbs in the door panels in the front driver and passenger sides were out. I replaced them today and no illumination. My battery is fully charged and I tried starting the car. Absolutely no power. Started fine earlier in teh day. No lights will come on, no turnover when I start the car--completely dead. Any ideas as to what the problem might be.
Tags:
Hi Dave,
Without being there to see it, I would first check both battery cables for proper connections; that the negative is grounded properly to the frame and then the positive cable -especially at the starter/solenoid (that nothing is shorted out). Also, the ignition switch to see if juice is present when you turn the key. I would start there and work my way through the wiring. Without being there it's hard to detect.
Dennis DiBari
Does the horn or headlight work? Check that the battery posts are clean and tight. Check the starter connections. The red wire comes off of the big post up to the fuse box and to the ignition switch. Check that there is power to the fuse box. Check the connector at the bottom at the red wire to power the fuse box.
The purple wire on the ignition switch goes to the NSS. Check the large 2 wires on the NSS for continuity when the car is in park. The NSS should connect the 2 large wires together when in park.
For the lights, check the body feed fuse.
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons on Thursday. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies 0 Likes
I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue
Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies 0 Likes
Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed. During this process we also installed factory power door locks to the…Continue
Started by Jason Edge in General Discussion May 3. 0 Replies 0 Likes
As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by