Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a particular universal reservoir that can be fitted and attached to the radiator support housing or the passenger inner fender? Then insert the overflow tube into the reservoir? Thoughts / suggestions?
I am monitoring coolant overflow and / or possible mixing with the oil. If an overflow reservoir doesn't clear up the puddle on the garage floor, I will investigate a possible head gasket issue.
Tags:
Several folks run the generic square coolant overflow tank. I see this in 99% of the uses. Amazon.com: Dorman 54002 Engine Coolant Recovery Kit Universal Fit ...
I mount mine on the RF inner fender right behind the radiator core support.
Thanks Russ. I'll check out the one you recommend.
Hi Michael,
I have a 64 Series 62 and albeit it never had an overflow for coolant, I decided to install one for safe measure. I found one that fit perfectly between the grill and the metal frame. Only had to drill one hole (the other was there) and it works perfectly. My email is ddibari56@gmail.com and can give you a picture and details.
Dennis DiBari, Cottekill NY
Michael,
I sent you an email with the information you requested.
Dennis DiBari
Hi Mike,
Any luck with the coolant overflow tank we talked about for your Caddy?
Dennis DiBari
I used a Dorman 603-001 coolant reservoir, and you will see a 6-connection fuse block I mounted under it for power to the headlight relays and eventually a four way flasher power. I drilled thru 3/8" bolts as spacers for the reservoir. The reservoir looks crooked, but it is parallel to the engine. The hose across the reservoir is a currently unhooked a/c line.
Hey Bill
I was checking out your coolant reservoir looks good,You should have the positive battery terminal covered in the case of an accident it will cause a dead short which may lead to a fire and we don’t want that to happen.happy motoring 😀
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by