The schematics are from the repair manual and show a LIGHT BLUE wire coming from the headlight switch to the dimmer switch. From the dimmer switch to the low beams on a TAN wire and to the high beams on a LIGHT GREEN wire. The picture is of my dimmer switch which has a GRAY, VIOLET, BLACK and RED wire. Can someone shed some light on what I am missing. I realize some of the colors I used are wrong, but the program I used is limited or would not stand out.

Views: 219

Reply to This

Replies to This Discussion

Not understanding what you are after. 

From what I am looking at in the schematics, there should be a light blue wire from the headlight switch to the dimmer switch. Why isn't there a light blue wire on the dimmer switch. Why isn't there a tan or green wire on the dimmer switch. According to the manual, there is nothing in between the headlight switch and the dimmer switch. And the schematic doesn't show a red wire at the dimmer switch. I was thinking that I could power a relay with the blue wire and power the dimmer switch with the relay, another way to keep the current down going thru the headlight switch,

Your car has the optional Guidematic AutoDimming option which has different wiring from the non guidematic headlight.  Look at Fig 12-106 on page 12-89 in your 1963 Cadillac shop manual. You will see your different colored wires.

I replaced all the dash lights and while I was in there, I decided to try to light the headlight switch and this is what I came up with, so far. Need to do some mods and will show what I did when it is finished.

RSS

Photos

  • Add Photos
  • View All

Forum

Headlight conversion

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill on Monday. 2 Replies

I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue

What parts do you need for your Cadillac?

Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies

What parts to your need for your Cadillac?  Need a part to get it running or just to tidy things up a bit?  Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion Jul 22. 0 Replies

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!

Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies

I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service