Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a particular universal reservoir that can be fitted and attached to the radiator support housing or the passenger inner fender?  Then insert the overflow tube into the reservoir?   Thoughts / suggestions? 

I am monitoring coolant overflow and / or possible mixing with the oil.  If an overflow reservoir doesn't clear up the puddle on the garage floor, I will investigate a possible head gasket issue.  

Views: 365

▶ Reply to This

Replies to This Discussion

Several folks run the generic square coolant overflow tank. I see this in 99% of the uses. Amazon.com: Dorman 54002 Engine Coolant Recovery Kit Universal Fit ...

I mount mine on the RF inner fender right behind the radiator core support. 

Thanks Russ.  I'll check out the one you recommend. 

Hi Michael,

    I have a 64 Series 62 and albeit it never had an overflow for coolant, I decided to install one for safe measure.  I found one that fit perfectly between the grill and the metal frame.  Only had to drill one hole (the other was there) and it works perfectly.  My email is ddibari56@gmail.com and can give you a picture and details.

Dennis DiBari, Cottekill NY

Michael,

I sent you an email with the information you requested.

Dennis DiBari

I saw somebody do this a few years back. Thought it was a clever solution

Hi Mike,

     Any luck with the coolant overflow tank we talked about for your Caddy?

Dennis DiBari

I used a Dorman 603-001 coolant reservoir, and you will see a 6-connection fuse block I mounted under it for power to the headlight relays and eventually a four way flasher power. I drilled thru 3/8" bolts as spacers for the reservoir. The reservoir looks crooked, but it is parallel to the engine. The hose across the reservoir is a currently unhooked a/c line.

Hey Bill

I was checking out your coolant reservoir looks good,You should have the positive battery terminal covered in the case of an accident it will cause a dead short which may lead to a fire and we don’t want that to happen.happy motoring 😀

Phillip,

Thank you for the suggestion, I should have thought of that myself. 

Bill

RSS

Photos

  • Add Photos
  • View All

Forum

lower rear control arm bushings on a 1964 Sedan de Ville

Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon yesterday. 3 Replies

Hello I am installing new bushings on my lower control and upper yoke arms. Does anyone have any advise or things I should be aware of in removing and installing the new bushings. Thankyou Ron PerryContinue

1964 Cadillac DeVille for Sale

Started by Jason Meyer in For Sale Oct 7. 0 Replies

Hey everybody, I have a family owned since new 64 Cadillac model 6267 Deville Convertible I have to part with. It runs strong with a 429 V8 original engine with 90,000 miles on it. Suspension has…Continue

Tags: 1964, Convertible, Original

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Kurt Oct 3. 13 Replies

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

1963 Dashboard With Autronic Eye Hole

Started by Earl R in For Sale. Last reply by Earl R Oct 2. 4 Replies

I bought this from a yard in Washington state.  I was told it was pulled and kept inside as soon as the car came in. I was going to dye and install it in my '63 Eldorado but sold the car.  Please see…Continue

Tags: Dash

Blog Posts

Authenticity Manual

Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments

Hi Robert,

     I emailed you more pictures for the Authenticity Manual.

Dennis DiBari

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service