Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a particular universal reservoir that can be fitted and attached to the radiator support housing or the passenger inner fender? Then insert the overflow tube into the reservoir? Thoughts / suggestions?
I am monitoring coolant overflow and / or possible mixing with the oil. If an overflow reservoir doesn't clear up the puddle on the garage floor, I will investigate a possible head gasket issue.
Tags:
Several folks run the generic square coolant overflow tank. I see this in 99% of the uses. Amazon.com: Dorman 54002 Engine Coolant Recovery Kit Universal Fit ...
I mount mine on the RF inner fender right behind the radiator core support.
Thanks Russ. I'll check out the one you recommend.
Hi Michael,
I have a 64 Series 62 and albeit it never had an overflow for coolant, I decided to install one for safe measure. I found one that fit perfectly between the grill and the metal frame. Only had to drill one hole (the other was there) and it works perfectly. My email is ddibari56@gmail.com and can give you a picture and details.
Dennis DiBari, Cottekill NY
Michael,
I sent you an email with the information you requested.
Dennis DiBari
Hi Mike,
Any luck with the coolant overflow tank we talked about for your Caddy?
Dennis DiBari
I used a Dorman 603-001 coolant reservoir, and you will see a 6-connection fuse block I mounted under it for power to the headlight relays and eventually a four way flasher power. I drilled thru 3/8" bolts as spacers for the reservoir. The reservoir looks crooked, but it is parallel to the engine. The hose across the reservoir is a currently unhooked a/c line.
Hey Bill
I was checking out your coolant reservoir looks good,You should have the positive battery terminal covered in the case of an accident it will cause a dead short which may lead to a fire and we don’t want that to happen.happy motoring 😀
Started by Rick Yasenchack in General Discussion. Last reply by Kurt 2 hours ago. 2 Replies 0 Likes
My 1963 Cadillac with original carb, rebuilt professionally and finally adjusted to not stall at stops, but not idles to a point I can drive 25-30 mph with no gas pedal.Nearing the end of a nightmare…Continue
Started by Jason Meyer in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 3 Replies 0 Likes
1964 deVille Convertible – $19,700 or Best Offer!Family-owned since new!…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Saturday. 2 Replies 0 Likes
We had a discussion on the power steering pump to steering gear hi pressure hoses on Sunday's Zoom Meeting and I was explaining the original hose with the crimp in center was considerably shorter…Continue
Started by Jason Edge in For Sale Oct 22. 0 Replies 0 Likes
One of our zoom meeting discussion topics from last Sunday was the new replacement for the 3/4" S-shaped heater return hose from heater core outlet nipple at firewall to hot water return pipe. The…Continue
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
November 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by