Good day to all, been a long time, missed the website and many posts I'm sure. Nearing the end of renovations gone wild. Thanks to Russ and all who keep this site going, I much appreciate it and will come to more I'm sure.
A while back I posted about compression issues with brake booster, which was affecting the engine and carb adjustments,
We have isolated what we believe to be a leak in the booster. Also my mechanic friends seems to think the booster is small for this size car. He does not have a fitting to test compression on the booster. Having not driven my baby for 2 years, its getting frustrating. Worse is my mechanic abilities.
What is a good aftermarket brake booster and how do I know I'm getting the right one, does anyone have a part number for given brand?
Tags:
Hi Rick,
Did you check available brake booster with:
http://www.cadillacpartsltd.com/index.html
Remco Waller
I will look now. So far new set with master cylinder is all I find from Summit.
Someone suggested the existing 8" is too small for this size vehicle, suggested dual diaphragm 9". Also mentioned the master cylinder is sized to the booster, so get both to be safe.
Thank yoo
cadillacpartsltd has just a rebuild kit. Thanks again for suggestion.
Started by Ron Perry in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 1 hour ago. 2 Replies 0 Likes
Hello I am installing new bushings on my lower control and upper yoke arms. Does anyone have any advise or things I should be aware of in removing and installing the new bushings. Thankyou Ron PerryContinue
Started by Jason Meyer in For Sale yesterday. 0 Replies 0 Likes
Hey everybody, I have a family owned since new 64 Cadillac model 6267 Deville Convertible I have to part with. It runs strong with a 429 V8 original engine with 90,000 miles on it. Suspension has…Continue
Tags: 1964, Convertible, Original
Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Kurt Oct 3. 13 Replies 0 Likes
Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue
Started by Earl R in For Sale. Last reply by Earl R Oct 2. 4 Replies 0 Likes
I bought this from a yard in Washington state. I was told it was pulled and kept inside as soon as the car came in. I was going to dye and install it in my '63 Eldorado but sold the car. Please see…Continue
Tags: Dash
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2026 Created by Jason Edge.
Powered by