1964 Conv. non-tilt. Got in my car today and went to put my shifter in "Reverse, or Drive " and the shifter moved but did not go into gear. I looked in the engine compartment and my shifter rod from the steering column WAS NOT moving to change position. Can anyone advise what to do next?
Thank you
Dominic
Tags:
On the non tilt columns, looking at your shop manual illustration, shift lever connects to shifter tube that connects to the shifter lever. It is a direct connection and all rotate together and I have outlined in yellow in illustration.
The carrier is pressed onto the shifter tube, onto a keyed area that keeps the carrier locked in place. It sounds like you carrier was not pressed onto the shifter tube all the way or has worked it self up and off the tube over the years. See the keyed area pointed to by pen in 2nd picture.
Started by Stephen Pechenik in Restoration Discussion. Last reply by Stephen Pechenik 14 hours ago. 5 Replies 0 Likes
I am readying my Fleetwood to be painted. I need to replace the driver's side left chrome eyebrow molding (below the headlights). It appears to be made from pot metal. Mine is broken and I need to…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
Hi everyone I would like to know dose anybody here have a tissue holder fitted to their car if so could you please send me a picture of it thanks in advance Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
CLC Membership dues are going up April 1. Join or Renew between now and March 31 and save! You can even renew with current rates for up to 3 years!Here is a breakdown of the rate increases Effective…Continue
Started by Jason Edge in Chapter Discussion on Friday. 0 Replies 0 Likes
Here is a breakdown of the rate increases Effective April 1:E-membership…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by