Anyone ever experienced the emergency brake pedal not locking in the "engaged" position. My pedal just springs back up - it won't lock when I press it. Everything else works, meaning the brakes engage, the pedal just won't stay down.
Tags:
Is that the case with the engine off? As you may know, the parking brake has a vacuum release that automatically releases the brake when it is not in Park or Neutral. The vacuum line comes from the Neutral safety switch. That said, the release mechanism could be malfunctioning. There is a manual release lever on the parking brake (push forward). You'll have to lay on the floor of the car to check everything out. It may just need to be lubed.
I pressed the pedal down this morning with the engine off and it stayed engaged. Once I started the car and put it in gear the E-brake popped up as it should. I just can't keep it engaged while thew car is running and parked for some reason.
A simple neutral safety switch adjustment may correct the issue. The adjustment procedure is in the shop manual (hopefully you have one). Not a terribly difficult job but you will be laying on the floor of the car reaching upward. You may want to remove the switch and clean and lube it. They do get brittle and crack as they age (like all of us do : ) There are a couple of Help topics on the NSS from the drop-down menu in the header of this page:
Tony is correct when he says "You can use the parking brake as an emergency brake—- if the brakes should fail and you push your foot on the parking brakes peddle ——to stop the car in a brake failure emergency." It serves as both a "park" brake and an emergency brake"
In fact it is stated right there in your owners manual: "Since the parking brake is always released when the transmission selector is in "Drive", "Low" and "Reverse" ranges, it may also be used as a fully controllable brake pedal, providing rear wheel braking only, under emergency or special conditions."
Thanks guys. Yeah, should have referred to it as the parking brake. Yep, when I first got the car the brakes didn't work so driving the car on and off the trailer I used the parking brake to stop the car. Once I rebuilt the brake system and had the car on the road the parking brake worked fine. It was just in the last few months that it failed to engage, and it's just something I figured I would try to fix.
Anders. Lighten up. Many of us on this side of the pond refer to Park Brake and Emergency Brake meaning the same thing... that "other" brake we need when we get in a tight spot when a good oak tree isn't available .... for sudden stopping or parked stopping. :-)
Started by Doug Scarrow in For Sale 7 hours ago. 0 Replies 0 Likes
These are the correct 50's and 60's CAX wheel weights for Cadillacs and Lincolns of that era they allow the Wheel Discs to fit properly there is a Lot of 24 half ounce GM part #1471452 Just…Continue
Started by Jason Edge in General Discussion 14 hours ago. 0 Replies 0 Likes
Here is a short clip after a cruise around town today, discussing optional power vent windows and an intermittent problem I have with my left power vent. Continue
Started by Russ Austin in General Discussion. Last reply by Russ Austin on Tuesday. 2 Replies 0 Likes
The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue
Started by Jeff Tepper in Restoration Discussion. Last reply by Russ Austin on Tuesday. 1 Reply 0 Likes
HI all,I replaced my sending unit with a no name one off ebay and it is all over the place. It does not even attempt to have any accuracy.We may try to fix the original unit. Seems like we need to…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2024 Created by Jason Edge. Powered by