The Seat Are Done!
Replies to This Discussion
-
Permalink Reply by Michael Vogler on
-
Tony,
The leather came from SMS Auto Fabrics. It's a little pricey, but the leather and hole patters and shapes are perfect. (I believe that SMS has some of the the original Cadillac leather dies. It sure looks like it). After placing the order, which you have to pay in advance, I received my leather in about 2 months.
I don't know who the upholsterer is as he was subcontracted through my body shop. But, I will find out and let you know.
As an aside, I'm a bit worried about scratching up the leather (my wife has two miniature schnauzers that must go everywhere with her and their nails will do terrible damage to the glove leather). Do you have any advice on clear plastic seat covers? (I can't believe I even have to ask that question..but you pick your battles. ;-)
Cadillac had a clear cover as an option in 1964, but of course NOS/OEM covers would almost certainly not be serviceable, if you can even find one.
Mike
-
-
Good point about who I would be saving the interior for...the next owner? As I've instructed my wife, there will be no next owner as I intend to be buried in my Deville! (I know that it's selfish to deprive someone of enjoying the car down the road, but if I'm going to Heaven (or Hell, as the case may be), I'm goin' there in style!)
Mike
-
Permalink Reply by Jason Edge on
-
Very Nice!
-
Permalink Reply by Tony Prichard on
-
How much did that run you altogether if you don't mind my asking? Thanks!
Photos
Members
Forum
Interior wood
Started by Jeff Donaldson in Restoration Discussion 11 hours ago. 0 Replies 0 Likes
Quick question......What is the best wood cleaner/polish for the interior wood trim in my 64 Fleetwood?CheersJeffContinue
WTB: passenger side C-pillar trim piece 63 SdV
Started by Mark Geertsma in Wanted to Buy. Last reply by Jason Edge yesterday. 1 Reply 0 Likes
I’m looking for the small passenger side C-pillar trim piece (roughly the division between roof and body) for my 63 Sedan de Ville. This is not the wide molding that extends sideways from the rear…Continue
Rescan of November 1962 Serviceman Bulletin Uploaded
Started by Jason Edge in General Discussion Jan 26. 0 Replies 0 Likes
Back in November I started rescanning the Serviceman Bulletins as a…Continue
Dino Undercarriage Restoration Continues Rearward at the Frame to Body Support Flat Braces
Started by Jason Edge in Restoration Discussion Jan 24. 0 Replies 1 Like
After making a decent start on cleaning up a section below right rear area of my my 64 Coupe de Ville - Dino's undercarriage, I have been slow to make more progress but in the last couple of days…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
-
February 15, 2026 - 63/64 Cadillac Chapter Zoom Meet-Up
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by
