The blower motor on my '63 is squealing from time to time. It is an A/C car if that makes any difference. I decided to pull it out today and add a few drops of oil to the motor bearing. The shop manual states to "remove five screws retaining motor assembly to blower housing and remove motor and fan assembly. It appears that the motor is mounted out the bottom of the blower housing, and is inaccessible from the engine compartment. I attempted to remove the housing from the fire wall by removing the 4 screws along the top, and a nut on a remaining fastener underneath, but it would only pull away from the fire wall at the top, and only about 1/2 and inch, Am I misunderstanding the instructions in the shop manual? Thanks for any help anyone can offer.
Tags:
Thanks Tony. I'll give that a shot tomorrow. Sounds like something that will be done totally by "feel", so it should be interesting putting it back in and getting the screws lined up with the holes. The only photo that I was able to find was a single shot with a green circle around it, but that should be enough to work with.,
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons on Thursday. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies 0 Likes
I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue
Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies 0 Likes
Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed. During this process we also installed factory power door locks to the…Continue
Started by Jason Edge in General Discussion May 3. 0 Replies 0 Likes
As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
May 17, 2026 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by