Is anyone using an aftermarket cruise control on there 64 Cadillac? what brand & model did you purchase?
Tags:
I'm pretty sure forum member Pat Wesphal has cruise on his 64 convertible. I'm going to email him to see if he can jump on here and share his experience.
I'd kind of like to install an original cruise control on my '64 Deville. I love the dial-in speed on the dash pad. I understand back in the day it could be installed at the dealership.
Chris, Yes i installed an aftermarket cruise system on my 64 Deville. I have been exceptionally pleased with it Send me a message at pat.westphal@gmail.com and we can discuss it for your vehicle.
Hi Paul, Can you post a picture of the dashboard switch too?
Here is what I did on my vehicle. What I like about the Dakota Digital system is that you have some options for the Dashboard switch. I mounted mine in that black box you can sde in the picture. You can mount it directly to the dash if you want, or you can also order a turn stalk that has the switch incorporated into the stalk similar to a modern car. This would replace the turn stalk in your car and as I didn't want to do that I opted for the dash mounted switch and the little black box.
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 1 hour ago. 13 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 2 hours ago. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by