Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a particular universal reservoir that can be fitted and attached to the radiator support housing or the passenger inner fender? Then insert the overflow tube into the reservoir? Thoughts / suggestions?
I am monitoring coolant overflow and / or possible mixing with the oil. If an overflow reservoir doesn't clear up the puddle on the garage floor, I will investigate a possible head gasket issue.
Tags:
Several folks run the generic square coolant overflow tank. I see this in 99% of the uses. Amazon.com: Dorman 54002 Engine Coolant Recovery Kit Universal Fit ...
I mount mine on the RF inner fender right behind the radiator core support.
Thanks Russ. I'll check out the one you recommend.
Hi Michael,
I have a 64 Series 62 and albeit it never had an overflow for coolant, I decided to install one for safe measure. I found one that fit perfectly between the grill and the metal frame. Only had to drill one hole (the other was there) and it works perfectly. My email is ddibari56@gmail.com and can give you a picture and details.
Dennis DiBari, Cottekill NY
Michael,
I sent you an email with the information you requested.
Dennis DiBari
Hi Mike,
Any luck with the coolant overflow tank we talked about for your Caddy?
Dennis DiBari
I used a Dorman 603-001 coolant reservoir, and you will see a 6-connection fuse block I mounted under it for power to the headlight relays and eventually a four way flasher power. I drilled thru 3/8" bolts as spacers for the reservoir. The reservoir looks crooked, but it is parallel to the engine. The hose across the reservoir is a currently unhooked a/c line.
Hey Bill
I was checking out your coolant reservoir looks good,You should have the positive battery terminal covered in the case of an accident it will cause a dead short which may lead to a fire and we don’t want that to happen.happy motoring 😀
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 9 hours ago. 5 Replies 0 Likes
Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue
Started by Jason Edge in Trivia 18 hours ago. 0 Replies 0 Likes
Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 18 hours ago. 1 Reply 0 Likes
Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons May 14. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by