Good morning, Can someone tell me if I am missing something. I have removed four screws to change burned out bulbs in the back of my 64 SDV, but the plastic lenses will not come out. Are there also bolts from the back. I know it is very simple, but I do not want to force it. I have posted photos to show what I am talking about. Thanks
Comment
Excellent. This just the help I needed. Thanks so much.
Did you remove the center aluminum ornament bar with the reflectors? You will go thru 3 sets of screws to remove it: 2 screws holding lower ends to ornament bar, 2 screws holding ornament bar to bracket, 2 screws holding bracket to tail light fixture. From there remove the upper and lower tail light screws, and gently wedge the tail light out with something thin, being careful not to crack. I touch of WD 40 can help remove it.
See complete center tail light ornament bar with reflectors, and a picture with tail light lense below:
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON 19 hours ago. 1 Reply 0 Likes
I noticed this issue at the end of last summer/fall, but it seems to be getting worse as I have begun driving for the season again. When I drive the car and get everything good and warmed up, if I…Continue
Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 3 Replies 0 Likes
I recently picked up a rather large batch of parts from a contact that has sold their 63 and had left over parts. Here was one item I pulled that make me smile - a 1963 Indiana License Plate. For…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Jeff Donaldson yesterday. 3 Replies 0 Likes
Has anyone bought new oem headlights from Lectric Limited? They want $150 for a set of new remanufactured ones. Any advice would be appreciated.JeffContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website