Kenneth Barton's Discussions (19)

Discussions Replied To (13) Replies Latest Activity

"Hi Joel, how sure are you of the condition of the fuel pump? I had a pump go out on…"

Kenneth Barton replied Apr 24 to VAPOR LOCK?

10 Jun 18
Reply by Joel A Campos

"Think I found the culprit - looks like a broken connection on the rheostat. Studying…"

Kenneth Barton replied Mar 22 to No dash lights, headlights only come on with dimmer

6 Mar 22
Reply by Kenneth Barton

"So it seems that the gray wire is not getting power at the headlight switch, despite…"

Kenneth Barton replied Mar 22 to No dash lights, headlights only come on with dimmer

6 Mar 22
Reply by Kenneth Barton

"Touching both sides of the fuse with my meter yields 12.2v. I’m afraid somehow ther…"

Kenneth Barton replied Mar 22 to No dash lights, headlights only come on with dimmer

6 Mar 22
Reply by Kenneth Barton

"Thank you both gents. I had the connector installed incorrectly - it was one blade t…"

Kenneth Barton replied Mar 22 to No dash lights, headlights only come on with dimmer

6 Mar 22
Reply by Kenneth Barton

"I was so confident that wasn’t it…until I looked closer and realized the screw wasn’…"

Kenneth Barton replied Mar 20 to Fuel gauge needle bouncing

3 Mar 20
Reply by Dennis P. DiBari

"Amazing! I missed this one in the archives, somehow. Thanks Jason!"

Kenneth Barton replied Nov 19, 2025 to 63 passenger ashtray won’t release

6 Nov 19, 2025
Reply by Kenneth Barton

"Also for anyone reading, here is the Serviceman bulletin related to the linkages, th…"

Kenneth Barton replied Nov 19, 2025 to 63 passenger ashtray won’t release

6 Nov 19, 2025
Reply by Kenneth Barton

"Thank you both, gents. Jason, I browsed through the service bulletins and was only a…"

Kenneth Barton replied Nov 19, 2025 to 63 passenger ashtray won’t release

6 Nov 19, 2025
Reply by Kenneth Barton

"I got it! The hose coming out of the right side of the valve seems to be the supply…"

Kenneth Barton replied Sep 15, 2025 to Vacuum line from check valve - 1963

2 Sep 15, 2025
Reply by Kenneth Barton

RSS

Photos

  • Add Photos
  • View All

Forum

Material for making staples for rubber splash shields

Started by Marty Smith in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

Here is the link to Mcmaster Carr for Staple material as discussed in the latest Zoom meeting. https://www.mcmaster.com/6517K24/          Not 100…Continue

Looking Back 15 Years Ago - Dino at Classics at the Capital

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply

Here is a short video of me cutting up with Dino 15 years ago. It popped up in my memories a couple days ago and thought I would share here. This was taken before we headed downtown Raleigh NC to the…Continue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Peter Lucas Aug 15. 26 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

64 A/C Time Delay Switch

Started by Jeff Donaldson in General Discussion. Last reply by Russ Austin Aug 13. 1 Reply

Hi,I am looking for a replacement for my A/C time delay switch. If anyone has one I would like to buy it. I'm trying to repair what is left of my melted one. I foolishly took it apart without taking…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service