1964 TH400 Torque Converter?
Hey guys! I’m back with another question lol. I noticed some vibration under acceleration while not moving that I suspect may be coming from the torque converter, so I’m looking to replace it while I have my engine out. Seems like a good idea, but I’m having trouble locating a new or rebuilt converter. I found this one below (link) at AutoZone that says it fits my 1964 Cadillac Deville (429 engine w/TH400 trans) however while reading the description it states for flat top bell housing, but my TH400 is round. Does anyone have any thoughts on this or can provide a part number?
https://www.autozone.com/drivetrain/transmission-torque-converter/p...
Replies to This Discussion
-
Permalink Reply by Jacob Foster on
-
FYI guys - this torque works! Just thought that I’d share the feedback in case anyone else comes across this issue. The new torque converter does have 6 lugs, whereas the original only had 3…spoke with the rebuilder and they confirmed that it would work. It did. I used 3 of the 6 lugs to bolt up to my original flywheel.
Photos
Members
Forum
Sneak Peek at our Next Newsletter Feature - Denis Binette's 14K Mile Coupe de Ville
Started by Jason Edge in Newsletters 6 hours ago. 0 Replies 0 Likes
Here is another sneak peak of our next newsletter feature - Denis Binette's 14K mile 1964 Coupe de Ville. I hope to have this distributed within the next couple of weeks. …Continue
Rear Main Seal & Transmission Pump Seal
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON on Saturday. 1 Reply 0 Likes
Hey everyone, I need to replace my transmission input seal before spring starts, I’ve been losing a lot of fluid post Sunday drive. I figured I’d do the rear main seal service bulletin at the same…Continue
Heater Control Valve
Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson on Thursday. 2 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb Feb 24. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
