63/64 Cadillac Website

ccp kit

tosh put the ccp kit on my 1963 caddy last year.their are 2 of them,one for stock one for larger wheels thru opgi I bought the stock wheels.master cyl.,rotors,spacers,and everything you need.i love them stop nice and straight,no more adjusting .me and a friend put in.only problem I had I lost a spacer that sit in master cyl.they had to send me a new one ,took couple of days.carefull when removing master cyl. out of box

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by 3rhxwymkupkp8 on March 12, 2020 at 11:27am

Thanks for the info. Do you happen happen to have the part number for the kit you bought? OPGI was adamant that their CPP kits would not fit stock wheels!

▶ Reply

Permalink Reply by 3rhxwymkupkp8 on March 12, 2020 at 6:28pm

Just talked to OPGI again and they are adamant that the CPP kits do not fit the stock rims.

I did get the latest Kanter catalog in the mail and they list a kit for $1,129 and it states it fits the stock rims. I sent them a note to ask for confirmation and see who manufactures the kit.

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Forum

Wanted - running 429

Started by Joel A Campos in Wanted to Buy. Last reply by Russ Austin yesterday. 4 Replies 0 Likes

Hi all,Looking for a running 429 doesn't have to be perfect but must have had the THM trans behind it.Thanks,JoelContinue

1963/64 Cadillac Chapter November 2025 Newsletter Posted

Started by Jason Edge in Newsletters. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes

I have just completed and posted the November 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue

1963/64 Cadillac Starting - Cranking System Basics

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 16 Replies 1 Like

I have had this info written up for some time and meant to post so here it is. I will link to this from our Help Page:1963/64 Cadillac Starting - Cranking System Basics Wiring You have a positive…Continue

Happy Birthday to Chapter Member Ted Mandalakis

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply 0 Likes

I am putting the final touches on the next newsletter which feature Ted Mandalakis and his splendid 1964 de Ville Convertible and just have to share this picture of Ted and the Caddy on his birthday!…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue