Hey everyone. Last year I had some trouble keeping the Caddy running. A little backstory, car hadn’t ran in 30 years. Rebuilt the crankshaft. I had it running pretty well for a bit. Even drove it the 20 miles to the Back to the 50’s car show and back. After that it had trouble staying running. It would die under moderate throttle and only idle for about 30 seconds before dying. I’ve decided to install an electric choke and block off the exhaust ports along with removing the heat raiser. Is there anything else anyone can think of the might help make troubleshooting easier?

Views: 73

Reply to This

Replies to This Discussion

Hi Jordan,

     I won't be around tomorrow to follow up, but just a few thoughts about your 64 Sedan DeVille.  After rebuilding the crankshaft and eliminating the heat riser and taking care of the intake manifold, how old is the carburetor and or gas?  Mine was also dormant for 30 years.  If you have a Rochester 4 Barrel, does it have the two small mixture screws in front, along with the much bigger idle screw in the left rear of the carburetor?  I only ask because that large idle screw in the rear is key to it idling properly.  If you get no reaction to turning the screw in or out, the vacuum underneath the carburetor might be clogged from the PCV hose/plastic plate.  Someone put an improper top carburetor gasket on my 64 and it blocked the hole for the vacuum for that idle screw.  There has to be a small triangular cut out specifically for that top gasket for that carburetor.  Once the fast idle kicks down and choke is open, the large screw is adjusted first (turning counterclockwise increases the idle).  Subsequent to that, adjust the two mixture screws.  Just some thoughts?

Yours truly,

Dennis DiBari

Cottekill, NY  

  

Jordan,

     One last thought.  How is the fuel pump on your Caddy?  If it is lagging, t hen the idle will be erratic as well.

Dennis DiBari

Thanks for the reply, Dan. The fuel system is all new, from the tank all the way to the rebuilt carb. It is a Rochester, I’ll do some messing around with the idle and mixture screws. I did find that the float levels were a little bit off. So I adjusted those. Hopefully that’ll give me something to work with.

A contributing item might be our nemesis...modern gas with ethanol. It can add to a the tendency for older cars to idle rough (especially when hot) and vapor lock.  My first trouble shooting fix is to install an elective helper pump near the gas tank.

Then, make sure all your fuel lines are away from contact with great sources, and wrap the metal lines with insulation material.

Third, try to find a station with pure gasoline.  

Let us know what fixed your problem. 

Jordan,

     C. Van Tune makes a salient point with the gasoline issue.  Here in NY, we have one gas station that carries 91 octane NON-ETHANOL gasoline.  This is the only gas I put in my 64 Caddy.  I also add an octane booster and Marvel Mystery oil at times to keep it smooth.  

Dennis DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Wednesday. 23 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

Help with missing bolts

Started by Phil in 1963/64 Cadillac Specific Discussion. Last reply by Phil on Saturday. 2 Replies

Hi y'all....Hoping to get some help here. I've checked my reference material and can't seem to find this info.My 63 convertible, non tilt steering column is missing the firewall bolts on the lower…Continue

1964 Cadillac wagon by Victor Body Works

Started by john w. warner in For Sale. Last reply by Chris Codd Nov 1. 1 Reply

Its on Hemmings.Needs work!Continue

Hesitation on starting after driving

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Oct 29. 25 Replies

I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service