"On my 63 CDV I bought correct diameter heater hoses that have a 90 degree Bend molded into them. They are available in different lengths that can be trimmed to fit. They look good and don't kink. I buy coolant hoses from NAPA."
Michael Monson's Discussions
Heater Core Replacement
Started this discussion. Last reply by David Thomas Dec 20, 2025. 3 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
WTB transmission cover plates
Started this discussion. Last reply by Michael Monson Sep 2, 2025. 2 Replies 0 Likes
I’m looking for both the cover plate over the torque converter and the cover over the flywheel. Apparently over the last 60 years, both have “fallen off” and now I’m looking on putting it back…Continue
Commercial Chassis Dual Battery Tray Questions
Started this discussion. Last reply by Michael Monson Sep 1, 2025. 3 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly
Started this discussion. Last reply by Russ Austin Apr 7, 2025. 3 Replies 1 Like
Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering. Also, possibly looking for an oil filter housing assembly for a 1964 429 motor. Starting to get…Continue
Michael Monson's Page
Latest Activity
"Might also bring this up in our Zoom meeting this evening."
"Based on zero responses, was my question not worded correctly, or do I have the correct info? Sorry if there was any confusion. Thanks"
Heater Core Replacement
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal cooling return tube These two links give some help, but I was hoping for confirmation that these are correct or any other available options. Thanks for the help…See More
"I have both of the cover panels, please email me at russ@thecadishack.com "
WTB transmission cover plates
I’m looking for both the cover plate over the torque converter and the cover over the flywheel. Apparently over the last 60 years, both have “fallen off” and now I’m looking on putting it back together. Also looking for the mounting bolts or info on them. This is for a 1964 deville with the th400 transmission. ThanksSee More
"Ok, thank you for the info and tips"
"This was not on any of the 4 1964 Series 75 (6723 & 6733) I pulled in and parted during the day and not in the 75 series literature, but Commercial Chassis Cars went out to coach builders who I could see installing a 2nd battery for the extra…"
"I have not seen a setup like that."
Commercial Chassis Dual Battery Tray Questions
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm not near my car for awhile or I would look. I'm looking in to doing a dual battery setup and looking at options. ThanksSee More
"The seal from Kanter arrived on Sunday, a few days early, along with a fancy catalogue. Now I have both seals in hand, comes the decision of which to use. I will probably use the Kanter seal rms13329fel since I have already tried the…"
"I'm in the same dilemma with a leaking rear main seal after using the BEST Branded seal and I have a little information/confusion to add. As of April 2025 (at least) the seal that Caddy Daddy sells is the Best…"
"Thats the back up light wires, no need to do anything with them. I can usually repair the NSS if you send me pics to verify what is damaged. "
Profile Information
- Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
- Yes 1964 Coupe Deville
- Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
- 35148
- 1963/64 Cadillac Chapter Member?
- no
Comment Wall (1 comment)
- At 10:04am on February 26, 2024,
Jason Edge said…
Welcome to the 1963/64 Cadillac Chapter & Website! Please feel free to jump in and tell us a bit about your 64 Coupe de Ville. Jason.
Photos
Members
Forum
Tissue holder
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion 10 hours ago. 0 Replies 0 Likes
Hi everyone I would like to know dose anybody here have a tissue holder fitted to their car if so could you please send me a picture of it thanks in advance Continue
CLC Membership Dues Go Up April 1st - Renew Now Thru March 31 & Lock in Current Rates!
Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
CLC Membership dues are going up April 1. Join or Renew between now and March 31 and save! You can even renew with current rates for up to 3 years!Here is a breakdown of the rate increases Effective…Continue
CLC Membership dues are going up April 1. Join or Renew before March 31 & Save!
Started by Jason Edge in Chapter Discussion on Friday. 0 Replies 0 Likes
Here is a breakdown of the rate increases Effective April 1:E-membership…Continue
1964 Comfort Control Power Servos & Transducers - Feedback on Rebuilding
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Friday. 2 Replies 0 Likes
I often receive requests for good 1964 AC Heat Comfort Control Power Servo’s and/or Transducers. I currently have 6 Power Servos and 3 transducers and all leak down with the vacuum pump. Some look…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
-
January 18, 2025 - 63/64 Cadillac Chapter Zoom Meet-Up
January 18, 2026 from 7pm to 8:30pm – Zoom
2 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by
