HI again,
I have the 63 cdv, with the flash assister on the dash,
My hi lo beams flash back and forth intermittently. sometimes they dont start flashing at all, sometimes they will just start flasihing on and off until I hit the button on the floor to get them to stop. sometimes they sound someone is down there hitting the floor button but the lights dont respond, you can hear the click but nothing happens, as if I have no control over that floor button. I have turned off…
ContinueAdded by Kim K Kaiser on January 9, 2022 at 12:55pm — 1 Comment
Readi g another thread. Does this look about right on balancer gap? Thats a 1/4 thick piece of metal.
Added by Kim K Kaiser on March 20, 2021 at 4:47pm — 4 Comments
ok, today, got a timing light,,
pulled the service manual.. i found were it state the 1 cylinder is front left. but i couldnt find timing info. i looked in the engine section and just couldnt fine it..
were or what should it be.
i also did several you tubes on timing, regarding idle timing, total timing and the curve timing,, i picked that up ok and understand what that is all about.. several of the video offerings made it understandable. one guy went from putting in…
ContinueAdded by Kim K Kaiser on July 2, 2017 at 2:22am — 2 Comments
Hi,
where would hubs like this come from,, ?? https://www.barrett-jackson.com/Events/Event/Details/1963-CADILLAC-COUPE-DE-VILLE-CUSTOM-COUP-201497
are they original to 63 ?
Added by Kim K Kaiser on June 23, 2017 at 4:46pm — 4 Comments
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
Back in November I started rescanning the Serviceman Bulletins as a…Continue
Started by Jason Edge in Restoration Discussion on Sunday. 0 Replies 1 Like
After making a decent start on cleaning up a section below right rear area of my my 64 Coupe de Ville - Dino's undercarriage, I have been slow to make more progress but in the last couple of days…Continue
Started by john w. warner in For Sale. Last reply by Logan Robb Jan 22. 2 Replies 1 Like
Its on Hemmings.Needs work!Continue
Started by Stephen Pechenik in Restoration Discussion. Last reply by Russ Austin Jan 21. 6 Replies 0 Likes
I am readying my Fleetwood to be painted. I need to replace the driver's side left chrome eyebrow molding (below the headlights). It appears to be made from pot metal. Mine is broken and I need to…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by