Front Fender Splash Guards Brackets

[Dominic Salemi]

Trying to clean up my 64 Cadillac convertible inside front fenders Missing the guard and brackets that hide the cornering light and blocks the inside of the front bumper. Does any on have a picture or the brackets that mount to the bumper to hold the inner bumper splash guard?

Thanks

Dominic

[Jason Edge]

Both LH & RH front lower bumper end splash aprons attach as follows:
2 3/8" hex head screws with wide washers thru top of splash apron into back lower wall of the radiator support.
1 3/8" hex head screw threw to the  front lower bumper end brace.
- The 1st picture shows the 3 attachment points for the RH side on my 1964 CDV circled in red.
- The 2nd picture shows the front lower bumper end attaching bracket that servers as the 3rd and lower attachment point of the splash apron. The brace is circled in green; the attachment point is pointed to with a red arrow.

[Dominic Salemi]

Russ

Thank you, Jason sent me an old bracket and I'm going to make a couple up out of stainless steel. Thanks for the update.