Needed - 64 Cadillac Trunk Crest Flip Cover Spring
I've ended up with two new 64 Cadillac trunk flip cover Crests (extra was just sold) and no springs as I can't find my old one now! I need a good solid flip cover spring. If anyone has a good solid one email me at jasonedge@nc.rr.com. 2 to 3 day priority shipping in a small flat rate box will be fine.
Also still looking for the 1964 Turbo Hydramatic Tilt Gear Shift lever with the Dark Sandalwood end cap in nice condition.
Jason.
Comment
-
Comment by Jason Edge on July 9, 2013 at 4:11pm
-
NOPE! LOL. I will wait for a nice original with a good tight knob and cap. I waited probably 4 or 5 years to get the shift lever and it came through this past year...so no hurry. When I finally take the car to a GN (where my obsessive anal retentive tendencies will kick in) I will pop the cap off, match up with some tan color and do the JB Weld thingie.)
-
-
I could but 1) getting it to match the exact color of the correct tilt and turn signal lever sandalwood caps will be tough (a dark brown or regular brown vs that amber/brown/tan color I have now will stick out just as bad) and 2) the lever I currently have has a loose end knob and cap glued in placed...that tends to work loose after so many drives. I've had the tilt levers with sandalwood caps, but sold before I switched over to the tilt column. I also of course want nice, pit free chrome. If I don't find one in say 5 to 10 years I will probably try and go the route of permanently securing the knob and cap to lever, and trying to match. I'm in this for the long haul and can wait it out for the correct piece.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Thursday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website