Tags:
the bottom of the switch is broken off and the wires no longer are held in--if is jump the wire out the window goes up and down--been this way for a while finally just quit working
Also check for broken wires inside the door jamb wire conduit.
all the wires have been repaired--99 percent sure its the switch
Phil, the drivers door is always the worst for wear. I have yet to bring in a car with all the wires intact. American Auto Wire builds new wire harness's. You just send them your old one.
Phil, I have a plug. Send me an email to; russ85747@hotmaiil.com
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari 2 hours ago. 1 Reply 0 Likes
Just back with a new batch of cadmium plated parts, I like to imagine Dino saying "Ahh" as I sort through the next cad plated goodies to install. This morning I installed a cad plated fuel pump to…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
As I shared last night in our Chapter Zoom meeting, here is a picture of the 9 totes with fasteners and other parts that will be taken to Winston-Salem NC for cadmium plating. This will be my 12…Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 4 Replies 0 Likes
I am considering replacing the shocks in my 64 SDV. They're not terrible, but are a little too wishy-washy. I want to replace them with shocks that most closely approximate the original damping rate…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
I love discovering new thing old things about my 64 Coupe de Ville. I bought the car on Nov 13, 1996 from Robert Jessup who lived in Raleigh, NC. The car had some unique early history having first…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
© 2025 Created by Jason Edge.
Powered by