63/64 Convertible interior quarter rub guard
Wanted: interior rub guard for a convertible. Attaches to the rear-most edge of the quarter trim panel. It's a small stainless piece with one screw attaching it. See photo. Need the right (pass) side.
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Bumping this. The last piece I need to complete my interior restoration. Attaches to the rear-most edge of the rear quarter trim panel. It's a small stainless piece with one screw attaching it. I only need the passenger side but will buy both if you have them. I've seen them on Old's and Pontiac convertibles as well. Should be the same for 63 and 64.
-
Permalink Reply by 3ft7bqmb7dryo on
-
Have you contacted willigton Cadillac? He has a 63 convert parts car.
-
-
These are either extremely rare or I just don't know where to look. But....After more than 5 years of looking I finally found a set from a 1963 Pontiac P8 on ebay and scooped them up.
-
-
It really was a happy moment. I can now say that my interior restoration is 100% complete!. Done!
Now, on to restoring the engine compartment....
-
Permalink Reply by Jason Edge on
-
Congrats on the find!
Photos
Members
Forum
Seam Sealer Locations?
Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson yesterday. 2 Replies 0 Likes
Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue
Rear Defroster
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 2 Replies 0 Likes
I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue
Share your Photos!
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 8 Replies 0 Likes
The wintertime blues are hitting hard as 3-6" of snow is forecasted for later this week. Share your favorite photos of your 63 or 64 Cadillacs! Spring/Summer/Fall cant get here soon enough!Thanks for…Continue
Techniques for replacing pinion seal on differential
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Friday. 2 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
-
February 16, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
February 23, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by
