My Eldorado has bucket seats.  The controls lack tilt.  Is this how they came? 

ithe door mounted control knob has forward/back and up/down but, no tilt.  
the up down isn’t working at the moment and forward/back is sluggish and pulls more from one side of the tracks.  

Views: 138

Reply to This

Replies to This Discussion

They came with 4 way (up, down, forward, back) on the driver side, and 2 way (forward and back on the right side).  If you want them to tilt back you can always unbolt front and add some rubber blocks under the front.   

- For non movement check the transmission on the left driver side for dried grease. Unbolt driver seat, flip back, and remove the transmission, open the case, and remove all dried grease especially on the slide rods that the electromagnetic actuators engage to pull the gears together to make the seat cables spin. The grease dries up and prevents movement of the actuators. Click on Seat Transmission - Cleaning the 6-Way and 4-Way Seat Transmissions to go to our Help Page for a visual and more details on cleaning. 

- For slow movement, unbolt seat, flip back clean out the tracks with WD40, 0000 steel wool, compressed air and whatever you have to work with. Also check that the main ground wire is secured to the floor. It usually a thick blue wire with an round connector that goes under one of the seat rail to floor bolts. Give the bolt and extra snug and make sure it is tight.  Also makes sure seat left and right rails are in same relative position front to back. Simply measure from front or back for equal distance.  Motor could be tired and burning out but usually cleaning and greasing seat rails and checking that ground will do the trick. Also make sure the seat harness connectors at motor and transmission are making good contact. Pull apart and clean if unsure. 

Thank you for answering the question. 
I was just watching the online dealers information and trying to pause the slideshow on the Eldorado seat page.  

‘’I’ll copy down the repair details for action when time permits.  

RSS

Photos

  • Add Photos
  • View All

Forum

Frost plugs

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies

Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue

Trivia Question #37: A Jiggy Car Frame Tool!

Started by Jason Edge in Trivia yesterday. 0 Replies

Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue

Trivia #36: NUTTY Fastener Trivia

Started by Jason Edge in Trivia. Last reply by Jason Edge yesterday. 1 Reply

Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue

Coolant leak above Passenger Feet

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons May 14. 13 Replies

As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service