A Little Bit More Cad Bling to Dino Today
I have generally been installing the cadmium hardware as I go on my 64 Coupe de Ville "Dino" and using it for posting pictures but have a few items I never got around to. I installed the cad plated fender skirt brackets on one side as it rained outside. Here's a quick view of the one side I did:
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Mine are covered in undercoat and road grime. Who knew they could look so good?! Nice detail!
-
Permalink Reply by Jason Edge on
-
Yep, mine had the road grime and undercoating also. What I noticed and guess I knew since I have parted so many out there is quite a bit of in and out and up and down adjustment for the skirt with these brackets. I was able to pull mine out a bit and line up the skirt to body line a bit better as I installed the bracket. I assumed this would be the case and one reason I wasn't in a big hurry to just throw the brackets on there. You have to savor and take advantage of these slight upgrades! LOL
-
-
Just to add... many understandably feel compelled to go replaced their tired, dulled stock hubcaps (wheel covers) with spoke wheels, etc.; however, with nice original covers and center caps, I have always thought these were gorgeous wheel covers. Yes, I am a bit biased.
Members
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 15 hours ago. 17 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
1963 Eldorado Trim complete set
Started by Robert Dye in For Sale on Thursday. 0 Replies 0 Likes
This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue
Convertible bumper jack
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark on Monday. 4 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
