The bench seats in my ‘64 need to be recovered. I want to get the leather and perforation as close to the original as possible, particularly with the very smooth glove leather. Any thoughts or recommendations? Attached is a pic of the perforation sample from my upholstery guy. It’s not quite right.
Tags:
Alright, I'll start. SMS Auto Fabrics (contact info is under the Parts Suppliers, Service tab above) will provide top quality, factory correct material. However they are not known for quick turnaround time or prompt status updates on orders. I'm sure you can do a search of our website here and find many stories about SMS. With all that said, after your interior is done, it will look fantastic and the prior frustration experienced before that point will fade. If you do go with SMS, whatever lead time they give you, triple it and you will be in the ball park. Good luck with your restoration.
Thank you Kurt. I checked out the website and put in a request for a call and leather sample. While the perforation looks correct, I’m can’t tell from the picture that the smooth leather is smooth enough. But with all the reports here, seems like a good bet.
Do you know if they create the entire seat upholstery and then my upholstery guy here installs the covers, or does SMS simply provide bolts of the material that my upholstery guy then sews?
I don't know if they create seat upholstery covers. When I had my seats done in 2006, I ordered leather, vinyl, and fabric from them and had a local upholsterer make the seats. My interior is Rose and it took a couple of tries for them to provide the correct color leather swatch. Also mine is a 63 so non-perforated. Black may be more readily available.
Got. Thanks.
Thanks, Tony. I’ll keep you posted.
Putt Georgi seems to still be in business. Thanks for the additional lead.
Scott Santora Online
Started by Russ Austin in For Sale 16 hours ago. 0 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 17 hours ago. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard yesterday. 7 Replies 0 Likes
My original '64 Devile radio has been rebuild and upgraded. Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue
Started by Doug Scarrow in For Sale yesterday. 0 Replies 0 Likes
Just listed nice 1964 Cadillac steering wheel for tilt column https://www.ebay.com/itm/266781070358. $150 plus $25 USA shippingContinue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by