Hi there,
after a lot of work on my brakes - new cylinder, hardware, shoes, hoses, going back to old drums,
the car still drags to one side. Does this for years now, but I hoped to get rid of it after all is new / changed.
When starting the engine and every part is cool the car brakes perfectly, totally straight.
Once the car heats up it drags to the left heavily, even if I didn't brake a lot.
So my thought was: The brake line to the front right is very close to the exhaust flange.
Maybe I have a problem that it heats up the brake line and fluid too much and so
braking power decreases on the right?
Did somebody have this problem and maybe a heat shield around the brake line would help?
Thanks everybody.
Sammy
Tags:
Yes as I wrote I did all this, alignment several times, brake in new shoes etc etc
If the alignment wasn't correct it would drag to one side at any time, if cold or warmed up.
But it brakes perfectly straight when brakes are cool and escpecially when engine and exhaust are cool.
The problem I got is when the engine heats up - not necessarily when the brakes are hot.
Not temperature of the drums and shoes is the issue, braking fluid seems to be boiling when its heated up by exhaust.
Yesterday I went to a shop for motorsport and they recommended some heat shield around brake line near exhaust manifold.
Maybe it's not at a proper position anymore.
Think I will give it a try.
Just reposition the brake line.
Sorry I didn't want to offend you in any way.
Like I wrote I changed brake parts several times, even wheel bearings and all springs.
Did a lot of adjustment, even taken the automatic adjuster out on the side it drags too.
No success.
But as it changes once the car heats up there has to be another issue, maybe the brake lines don't sit properly anymore as they should be so the problem with overheating brake fluid occurs.
As I only got a simple floor jack it's not that easy for me to relocate them and if they bent I have a major issue here in my area in Germany - the shops around here are not familiar with this kind of work.
I'll try it with a heat shield and if this helps I can rent a lifting platform and try to relocate them.
I never had an issue like this before in all over 30 years working on my cars, but I hope to get it fixed this way.
Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 3 hours ago. 1 Reply 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 4 Replies 0 Likes
So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by