My Car is ON THE ROAD!!
Momentous day today!!!! Brought my De Ville home today. I had my transmission rebuilt at a local transmission shop. Old soul working there that knows Hydramatic Transmissions. All the leaks repaired, new clutch plates and seals, filter, fluid and he replaced the torque converter. AND, he painted it for me! I also had the transmission lines replaced.
Wish I had more time to drive today but I managed about 50 miles of highway and city driving! First time the ole girl was on the street in over 15 years.It sure felt good!
Those that kept me off the edge of the cliff the other day when I couldn't get the water pump to crossover connection to seal, thank you! Two O-rings and a little blue RTV did the trick!
- Attachments:
-
-
afterwaterpump.jpg, 738 KB
-
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi Scott,
Congratulations!!! It is a great feeling and glad you got that rebuilt. Hopefully all the water leaks are good and happy driving. As an original owner, we both know the feeling of driving it!!!!!
Dennis DiBari, Cottekill, NY
-
Permalink Reply by Scott Santora on
-
Thanks Dennis. I'm pretty sure the coolant leaks are fixed. Like I wrote, I put about 50 miles on the car and a good chunk of that was highway. I kept an eye on the temperature gauge. When I got her home, nothing dripping, no funny odor, and the upper radiator hose was nice and firm. System was holding pressure!
Hoping for the sky here to clear. We're getting lots of cloud cover and chances of rain. Some remnants of hurricane Helena ruining things. Maybe I'll get the top down soon!!
-
-
Scott,
Great news and no leaks! When the sun comes out after Helena, top down and another spin!
Dennis DiBari
-
Permalink Reply by Michael Vogler on
-
Congratulations! Enjoy the ride. Mike
-
Permalink Reply by Jason Edge on
-
That is fantastic news ...and the engine is looking great!
-
-
Scott,
As Jason said, the engine looks great. It must run great as well!
Dennis DiBari
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
