My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks.
Tags:
Hi Bobby,
Some of the Auto Parts stores now carry Power Steering fluids that have a stop leak additive. I believe Prestone and Valvoline are two of them. If I am a little low, I use one of them. Seems to work well. Hope you are well and regards.
Dennis DiBari
I do believe the book calls for ATF in the Power Steering Reservoir.
I do find mine gets low about every 6 mos, but no drips to my knowledge. As Dennis said, I think Lucas makes a Power Steering additive for a stop leak application.
Me personally, I am not sure I'd use that in a 60 y/o car, I'd say if its not leaking visibly, then top it off and move on. Just keep an eye on it!
Hope all is well with you! Have a great one!
Logan
Thanks to you both, Logan and Dennis. I didn’t look in the repair manual. The owners manual didn’t specify. I think it’s low since I had the front cover work was done as I don’t see a leak.
Bobby,
Just keep an eye on it from time to time as you are doing.
Dennis DiBari
Hey Bobby
just adding my. 10 cents worth. I added a power steering filter to mine as it may help keeping the lines clean
regards
phil
Hi Phil,
Do you have a picture of that Power Steering filter you wrote about? Interesting!
Dennis DiBari (Still working on my grill - inspired by you.)
Hi Dennis
see the attached for a picture of the power steering filter
I replaced the power steering pump a couple of years ago as the old one was leaking badly and spraying fluid everywhere it also was marking a whining noise ( a bit like the wife sometimes)once I removed the pump I found the the old dip stick in side it which probably didn’t do it any good,since the replacement I have had no problems or fluid loss.a mechanic mate suggested the filter it seemed like a good idea
im still working on the grill about 70 % finished
regards
Phil
Hi Phil,
Thank you for posting the picture of the PS filter. I never saw one of these and I truly like the idea. By the way, my wife sometimes makes the same whining noise!!!!
Dennis DiBari
Hi Bob,
The manual calls for GM Power Steering fluid. I bought this from Amazon and it seemed to work well.
ACDelco GM Original Equipment 10-5073 Power Steering Fluid
The manual says in a pinch you can use Transmission fluid. Comparing the GM Fluid to the Transmission Fluid the GM Fluid seemed a bit thinner. I had 100% transmission fluid in mine and pumped it out and replaced it with the GM stuff. Might have been my imagination but the steering felt a little easier with the GM Fluid.
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 12 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by