So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out that the back up light worked before I started this journey. I was trying to get the plug out from under the license plate and probably unknowingly partial removed it! 
Then on Sunday’s zoom meeting Pat recommended pulling the plug by the plate. Of course I zeroed in on the bulb and sweated over getting the lenses and cross piece out! Finally got the screws that hold the cross piece out, one by pure strength and PB Blaster, the other by using a removal  bit and basically grinding off the bolt head. Then replaced the bulb and tested it and nothing! THEN it hits me about the plug and cleaning the corrosion off the tabs. Sure enough, put the plug on the clean tabs and BAM everything worked!

- Pat you’re a gosh darn genius!

A couple of lessons here, obvious one is when Pat suggests something do it! And second, always do the easy stuff first!

Views: 149

Reply to This

Replies to This Discussion

Dave,

     Great work and Pat hit it on the nose!!!  Glad to hear it worked out well!

Dennis DiBari

Dave. Glad you got your car working again. Thank you for the compliment and it’s actually experience more than anything else. 

RSS

Photos

  • Add Photos
  • View All

Forum

A Big Welcome to the 63/64 Cadillac Chapter to my Brother Randy

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 3 hours ago. 1 Reply

My brother Randall (Randy) Edge has been helping me off and on for many years with traveling to pick up parts cars all over the east cost, to almost anything and everything I need help with around…Continue

Frost plugs

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies

Summer is coming, and now the next frost plug is leaking.Has anyone ever done these?Which kind of plugs did you use and where to buy them?Read a lot about "adjustable" plugs and sealants - but not…Continue

Trivia Question #37: A Jiggy Car Frame Tool!

Started by Jason Edge in Trivia yesterday. 0 Replies

Yesterday, after struggling with other tools to disassemble a part using some not quite right tools, I decided to use the car frame as a "jig" to hold the part in place while I removed the other…Continue

Trivia #36: NUTTY Fastener Trivia

Started by Jason Edge in Trivia. Last reply by Jason Edge yesterday. 1 Reply

Ok. Here is a fastener I see about every day working with my big inventory of fasteners, and thought it was worth posting as trivia. If you saw my post on Facebook (I do sell them), wait to see if…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service