Gump(Pat Westphal) you’re a gosh darn genius!
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out that the back up light worked before I started this journey. I was trying to get the plug out from under the license plate and probably unknowingly partial removed it!
Then on Sunday’s zoom meeting Pat recommended pulling the plug by the plate. Of course I zeroed in on the bulb and sweated over getting the lenses and cross piece out! Finally got the screws that hold the cross piece out, one by pure strength and PB Blaster, the other by using a removal bit and basically grinding off the bolt head. Then replaced the bulb and tested it and nothing! THEN it hits me about the plug and cleaning the corrosion off the tabs. Sure enough, put the plug on the clean tabs and BAM everything worked!
- Pat you’re a gosh darn genius!
A couple of lessons here, obvious one is when Pat suggests something do it! And second, always do the easy stuff first!
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Dave,
Great work and Pat hit it on the nose!!! Glad to hear it worked out well!
Dennis DiBari
-
Permalink Reply by Patrick Westphal on
-
Dave. Glad you got your car working again. Thank you for the compliment and it’s actually experience more than anything else.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
