I’m looking for the small passenger side C-pillar trim piece (roughly the division between roof and body) for my 63 Sedan de Ville. 
This is not the wide molding that extends sideways from the rear window, but a narrow trim piece right below that!

Anyone here?

Views: 82

Reply to This

Replies to This Discussion

I believe you have a 63-6339 body style (1963 4 Window Sedan de Ville)

If this is the rear qtr belt or drip molding I would have.

Here is link to rear qtr molding: https://www.facebook.com/media/set/?set=a.588387922743195&type=3

Here is link to drip molding: https://www.facebook.com/media/set/?set=a.626886205560033&type=3

If it is another trim  piece I would probably have and either a picture or shop manual name & reference would help. Email me details at jasonedge64@outlook.com

Hi Jason,

I’m looking for a small stainless trim piece, right below the wider molding (see pic).

Looking at your 1963 Shop Manual page 16-76, Item H - Roof Panel Side Rear Molding, That trim goes parallel with the bottom edge of the car body C pillar and extends over the rear section of the door. That rear section of the door is painted at top. Perhaps you are dealing with early production flat trim added to the doors??? 

I do have plenty of the Roof Panel Side Rearm Molding trim pieces some in very nice condition.

Perhaps you can provide a picture of this trim piece removed from right side, or still attached to left side. Other than that I am completely at a loss.

RSS

Photos

  • Add Photos
  • View All

Forum

Coolant leak above Passenger Feet

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons on Thursday. 13 Replies

As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue

front brake wheel cylinders

Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari May 12. 6 Replies

I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue

For Sale - Fresh Chrome 1963 Series 62 Conv/CDV/Eldorado door panel chrome bezels

Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies

Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed.  During this process we also installed factory power door locks to the…Continue

No AC 1963 Eldorado Unique Dash End Panels

Started by Jason Edge in General Discussion May 3. 0 Replies

As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service