I’m looking for the small passenger side C-pillar trim piece (roughly the division between roof and body) for my 63 Sedan de Ville. 
This is not the wide molding that extends sideways from the rear window, but a narrow trim piece right below that!

Anyone here?

Views: 90

Reply to This

Replies to This Discussion

I believe you have a 63-6339 body style (1963 4 Window Sedan de Ville)

If this is the rear qtr belt or drip molding I would have.

Here is link to rear qtr molding: https://www.facebook.com/media/set/?set=a.588387922743195&type=3

Here is link to drip molding: https://www.facebook.com/media/set/?set=a.626886205560033&type=3

If it is another trim  piece I would probably have and either a picture or shop manual name & reference would help. Email me details at jasonedge64@outlook.com

Hi Jason,

I’m looking for a small stainless trim piece, right below the wider molding (see pic).

Looking at your 1963 Shop Manual page 16-76, Item H - Roof Panel Side Rear Molding, That trim goes parallel with the bottom edge of the car body C pillar and extends over the rear section of the door. That rear section of the door is painted at top. Perhaps you are dealing with early production flat trim added to the doors??? 

I do have plenty of the Roof Panel Side Rearm Molding trim pieces some in very nice condition.

Perhaps you can provide a picture of this trim piece removed from right side, or still attached to left side. Other than that I am completely at a loss.

RSS

Photos

  • Add Photos
  • View All

Forum

Take heads off for rebuild

Started by Ian Arnold in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies

Compression test 15 years ago was good. Not a lot of miles since then. Summer car.Last year had a oil pressure issue. Found an aluminum flake had stuck open oil pressure relief valve. (Low pressure…Continue

Headlight conversion

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill Jul 27. 2 Replies

I recently converted my dim yellow headlights to LED after nearly cleaning up a roo the other night see attached pics for before and after …Continue

What parts do you need for your Cadillac?

Started by Russ Austin in General Discussion. Last reply by Russ Austin Jul 23. 2 Replies

What parts to your need for your Cadillac?  Need a part to get it running or just to tidy things up a bit?  Starters to nice A pillar moldings, my 1500 squarer footing shop is packed with parts. …Continue

Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!

Started by Jason Edge in General Discussion. Last reply by Cees de Bunje Jul 22. 10 Replies

I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service