63/63 Owners,
The clock in my '64 just went out. It appears that the mechanical component is working properly, so I think the coil has failed. I contacted Jerry at Clockworks and he advised that he cannot repair a clock with a burned out coil because he no longer has coils available. Any recommendations on where I can get it repaired?
Thank you in advance for your assistance.
Very Respectfully,
Mike Vogler
Tags:
Hi Mike,
I know that one of our members, Pat Westphal, repairs clocks for Cadillacs. See if you can reach him and ask about the coil. I have his information. My email (you may have it still) is ddibari56@gmail.com. He was a GM engineer.
Dennis DiBari
Mike, I have clock parts, please send me an email; russ@thecadishack.com
Hi Mike,
I have a parts clock and the coil appears good, ohms out. I have no use for it.
Linda
A big THANK YOU to everyone who offered assistance with my clock!!
I did some reading about old mechanical car clocks last night. So, today I removed clock from the dash again and opened it up. Upon close inspection, the coil did not appear to be burned and the wires were intact. I sprayed the contact points with contact cleaner and gently filed the points with the small file on my nail clippers. :-D I then lubricated the clock and reinstalled it. Bingo! It works just fine!.
Thanks again.
Mike
Great news Mike! So glad you got it working!
Linda
Hi Mike,
You probably know this, but the ground is the linchpin with our clocks. Sometimes you line them up and twist them clockwise and it takes a slight twist/jiggle to start them. GLAD you got it working. I sanded the back of the clock rim, where it makes contact to the dash, and it helped.
Dennis DiBari
Started by Jason Edge in General Discussion 19 hours ago. 0 Replies 0 Likes
A lot has changed for me in the last year or so!With the help of Chat-GPT and a library of SIX Cadillac Master Parts Books, the 1963 and 1964 Shop Manuals, and a growing list if scanned and…Continue
Started by Russ Austin in General Discussion yesterday. 0 Replies 0 Likes
Is anyone looking for a 64 right side front bumper bucket? Before I put it on ebay, I thought I would give the group a buzz first.Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 2 Replies 0 Likes
Way back we had lower resolution JPG picture scans of the monthly Cadillac Serviceman Bulletins, and started rescanning the October and forward bulletins as higher 600dpi resolution searchable PDF…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Russ Austin on Saturday. 3 Replies 0 Likes
Hi,I am looking for a replacement for my A/C time delay switch. If anyone has one I would like to buy it. I'm trying to repair what is left of my melted one. I foolishly took it apart without taking…Continue
Posted by Dennis P. DiBari on August 27, 2026 at 12:45pm 2 Comments 0 Likes
Hi Robert,
I emailed you more pictures for the Authenticity Manual.
Dennis DiBari
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
December 13, 2026 from 7pm to 8:30pm – Zoom
2 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by