Color Wiring Diagram - 1963 Series 62 Convertible, AC, AM/FM. Power WIndows, Power Seats
I've been working on a wiring diagram for my '63 Series 62 Convertible. I've merged diagrams from a bunch of sources including postings here and the Shop Manual. I also gained info just by looking at my car. The diagram includes wires in generally correct colors, color and wire gauge (when I could find it) labels, connectors, and original bulb numbers.
It is useful to me, and I suspect others might find it useful too, so here it is. It prints best on 11 by 17 paper, but it is generally usable on letter size paper too.
This version does not incorporate the Autronic Eye, but I will add that sometime and post an update.
If you see any errors or have any suggestions, please let me know and I'll make an update.
I am not sure if this site reduces the resolution of images, but just in case, you can find the full-size high resolution image of the diagram here: https://live.staticflickr.com/65535/49974711807_bb276f2420_o.png
The link above will also always have the most updated version of the diagram.
p.s. I know I could have just bought the color diagram, but putting this together gave me a diagram (mostly) specific to my car, and it helped me see how everything is connected.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
Looks great. Just click on the image to enlarge. I saved the pic to out Wiring Schematics Help Page. Thanks for sharing!
-
Permalink Reply by keith price on
-
would this be close to a 2 door hardtop? all but a few extra wires for the top? Or does anyone have one for a series 62 64
Members
Forum
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Maurice Hamelink yesterday. 2 Replies 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt May 20. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
