A Little Bit More Cad Bling to Dino Today
I have generally been installing the cadmium hardware as I go on my 64 Coupe de Ville "Dino" and using it for posting pictures but have a few items I never got around to. I installed the cad plated fender skirt brackets on one side as it rained outside. Here's a quick view of the one side I did:
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Mine are covered in undercoat and road grime. Who knew they could look so good?! Nice detail!
-
Permalink Reply by Jason Edge on
-
Yep, mine had the road grime and undercoating also. What I noticed and guess I knew since I have parted so many out there is quite a bit of in and out and up and down adjustment for the skirt with these brackets. I was able to pull mine out a bit and line up the skirt to body line a bit better as I installed the bracket. I assumed this would be the case and one reason I wasn't in a big hurry to just throw the brackets on there. You have to savor and take advantage of these slight upgrades! LOL
-
-
Just to add... many understandably feel compelled to go replaced their tired, dulled stock hubcaps (wheel covers) with spoke wheels, etc.; however, with nice original covers and center caps, I have always thought these were gorgeous wheel covers. Yes, I am a bit biased.
Members
Forum
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch 4 hours ago. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Bill Wolf 14 hours ago. 3 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 15 hours ago. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
