So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out that the back up light worked before I started this journey. I was trying to get the plug out from under the license plate and probably unknowingly partial removed it!
Then on Sunday’s zoom meeting Pat recommended pulling the plug by the plate. Of course I zeroed in on the bulb and sweated over getting the lenses and cross piece out! Finally got the screws that hold the cross piece out, one by pure strength and PB Blaster, the other by using a removal bit and basically grinding off the bolt head. Then replaced the bulb and tested it and nothing! THEN it hits me about the plug and cleaning the corrosion off the tabs. Sure enough, put the plug on the clean tabs and BAM everything worked!
- Pat you’re a gosh darn genius!
A couple of lessons here, obvious one is when Pat suggests something do it! And second, always do the easy stuff first!
Tags:
Dave,
Great work and Pat hit it on the nose!!! Glad to hear it worked out well!
Dennis DiBari
Dave. Glad you got your car working again. Thank you for the compliment and it’s actually experience more than anything else.
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jacob Simmons yesterday. 13 Replies 0 Likes
As is with my luck with this car (I still love it to pieces, just needs some TLC from neglect and not being driven) I’ve developed another issue. A small coolant leak has started from the Passenger…Continue
Started by Bill Wolf in General Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies 0 Likes
I am trying to replace the front wheel cylinders on my 63 SDV and can't figure out how to get a wrench on the bolts holding them on. Does the backing plate have to come off and if so, how? Thank you…Continue
Started by Anthony Vanacore in For Sale. Last reply by Anthony Vanacore May 6. 5 Replies 0 Likes
Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed. During this process we also installed factory power door locks to the…Continue
Started by Jason Edge in General Discussion May 3. 0 Replies 0 Likes
As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
May 17, 2026 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by