Has anyone replaced any/all of these parts? If so, where did you buy them? Also, and most importantly, did replacing them change any characteristic of the car, like maybe reduce driveline vibration?

Thanks

Norm

Views: 94

Reply to This

Replies to This Discussion

Norm, I did a full rear end suspension upgrade this summer. I did replace the bushings and spherical joint on the rear yoke. Also replaced front and back bushings on the rear trailing arms along with the springs and shocks. For the back bushing on the trailing arms along I got a poly bushing with aluminum sleeve from Dan McNarry( chapter member). I highly recommend these as the original type bushings wear out rather quickly and the poly’s help the driveline!  All the other bushings  and spherical joint I bot on Rock Auto or Caddy Daddy. WARNING: when replacing the spherical joint do not use the bolts, washers and nuts that come with it. Go buy matching size grade 8 parts, don’t ask how I know this!

Norm,

I bought the rear ball joint part from Rare Parts Steering and Suspension.  I paid a neighborhood mechanic to install it given its location, the need for grinding et cetera.  I can't say whether or not it affected the ride of the car as I had also replaced most of the other suspension components and I had no driveshaft vibration before or after.  I do know the mechanic did not enjoy the process of replacing the part.  

https://www.rareparts.com/

https://www.rareparts.com/search?make=Cadillac&model=DeVille&am...

The forum does have at least one lengthy discussion about the trailing arms.  

https://6364cadillac.ning.com/forum/topics/rear-trailing-arm-bushin...

There may be more commentary.

hth

Chris

Thank you , Chris. I have not replaced anything back there yet because I have not really inspected things as closely as I need to-but I suspect the car probably needs something refreshed in the rear suspension.

Also, THANK YOU SO MUCH for the link regarding the discussion. I am absolutely helpless when it comes to finding things on any website. I'm just an analog guy catapulted in to a digital world-and not liking it. 

Norm

Thank you, Dave!

I'm not even sure I need this stuff, but suspect at least one part of something back there is worn as I sometimes get a "groan" out of the rear on sharp turns. 

Norm

RSS

Photos

  • Add Photos
  • View All

Forum

Burning Rubber

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 3 hours ago. 6 Replies

Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light?   Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue

Gas gauge only reads half when full

Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply

Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue

64 Brakes

Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service