Odometer?
A while back my odometer quit working just as it was turning over 40000 mi. I took some time and pulled the speedo out expecting to see a stripped gear somewhere. What I found was a chunk broke out of the odometer dial. Its locked up tight.
I replaced the dial with a working one but would like to set the numbers to around 42000 instead of showing 004876.
My question, does anyone know the procedure for resetting the number on the odometer dial?? I don't want to break the gears inside on the working one.
Thanks for any help.
Tom B
Comment
-
Comment by Jason Edge on November 26, 2014 at 5:35pm
-
It's been a while since I had one apart but like Tony said, I remember that you could just rotate the #'s to whatever you want to show once disassembled and dial removed. Also, If you need any internal hardware I probably have 3 dozen of these to pull from.
Photos
Members
Forum
Hot Start/Ignition System Overhaul 1964 Fleetwood
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON 13 hours ago. 1 Reply 0 Likes
I noticed this issue at the end of last summer/fall, but it seems to be getting worse as I have begun driving for the season again. When I drive the car and get everything good and warmed up, if I…Continue
Cool Item from Batch of Parts I Just Picked Up
Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 3 Replies 0 Likes
I recently picked up a rather large batch of parts from a contact that has sold their 63 and had left over parts. Here was one item I pulled that make me smile - a 1963 Indiana License Plate. For…Continue
T3 Headlights
Started by Jeff Donaldson in General Discussion. Last reply by Jeff Donaldson yesterday. 3 Replies 0 Likes
Has anyone bought new oem headlights from Lectric Limited? They want $150 for a set of new remanufactured ones. Any advice would be appreciated.JeffContinue
Blog Posts
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
'63 Eldorado trumpet horn + 2 standard horns restoration
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
ContinueEvents
© 2024 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website