hi all
a few techy questions for answers please
I have a new cancel cam to fit - how easy to remove steering wheel to fit the cam?
Power boot release (in glove box) = vacuum line missing. where could it be?
Trunk light out in dash cluster - how to replace
thanks
Comment
I just posted some pictures of the power trunk release/pull down components in this album: http://6364cadillac.ning.com/photo/albums/power-trunk-release-pull-...
You can see the indicator harness with green wire that run down left side of car body and under door sill(s) in top right of this picture of power trunk release/pull down compoents. On the ground side with the green wire it ends with a bullet connection that attaches to the pull down mechanism at the very back. You also have a bout a 3' red wire that taps into the dash harness. Check the bullet connection at back, check the two connections off the hot red wire, and of course check the bulb, and fuses.
ok so the light is grounded by the trunk opening? will recheck the grounding in the trunk then
yes power trunk - light was working - got to it seemed to be no voltage there
at the cluster
thanks
did all that - replaced bulb - still no light! no voltage getting to it. oh well not a big worry.
another question - i saw i think the control box for the auto headlights - looked like
valves in there - answers possibly another question - sentinal off - auto dip off - normal
beam goes on - normal ops - if I then hit the high beam it takes from cold about 20
seconds for the high beam to work then OK. is this the valves warming up?
cheers
Started by Cees de Bunje in Restoration Discussion 1 minute ago. 0 Replies 0 Likes
Goodday to you all. I am about to start restoring the wooden veneer on the doors and dashboard of my 63 Eldo Biarritz. Now i have managed to get a big part of veneer oft of the door and i think it is…Continue
Tags: Veneer
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Robert Schles 38 minutes ago. 7 Replies 0 Likes
I recently brought in an original, unrestored 1963 Indiana license plate…Continue
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Mike Travers yesterday. 10 Replies 0 Likes
I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue
Started by Tosh Dickenson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 1 Reply 0 Likes
There appears to be some kind of felt washer around the top of my oil dipstick, presumable to seal off the dipstick tube. I've looked around the usual parts suppliers but came up empty. There's not…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website