I recently brought in an original, unrestored 1963 Indiana license plate and posted on another thread and it was suggested we post pictures of our vintage, antique or personalized plates we run on our 1963/64 Cadillacs. 

I will start this off by showing a full rear shot of my 64 Coupe de Ville with an original 1964 North Carolina license plate.  In NC you can run a correct vintage plate as long as you keep the current license plate and registration in the car. Unlike some states they are not linked.  My plate is like new and believe it was restored.  I bought it so long ago now I can't remember!

If you have a unique plate on your 63/64 Caddy please share! Maybe we will run these in a future newsletter. 

Views: 259

Reply to This

Replies to This Discussion

Here is my Personal Plate

Attachments:

Nice! ... indeed!

If you go up in my office you will see these 1963 and 1964 North Carolina license plates. In NC they alternated between black background with yellow lettering and orange background with black lettering. You could definitely tell the difference between the years unlike today with the little sticker in the corner.

If you read the article about my '64 Eldo in a recent newsletter, then you've already seen this photo. If you haven't, that's me as a Cadillac-loving 6-year-old next to my mom's just-months-from-new '64 CdV.  

When I bought the Eldo, I wanted to have that same license plate sequence on it.  So, it's now nostalgic fun to see "Mom's license plates" on my Eldorado.  And, she would love that.  OME708 lives on!

Attachments:

About 21 years ago I registered my car as an antique and received my specialty plates from the State of Texas (pic below). I was not thrilled with look of those plates so decided to try the find some year of manufacture plates which are legal to be registered to antique or classic cars here. I bid on 2 different sets of 1963 Texas plates hoping I might win one set. I wound up winning both sets. The best set was fresh from the prison factory still in package with the paper in between them (pic below). I think I paid $20 for one set & $25 for the other. Boy have things changed! It looks like "virgin" plates are going for 10X that these days.

"Antique Plate"

YOM Plate separator paper

Nice!

Delaware doesn’t allow custom plates to start with a number. Fortunately no one else in the state has a 64 Cadillac plate. 

Attachments:

Here is mine! I actually have 2, the other is on my car and not in as good of shape. This one is the significantly cooler one as it is still in the original envelope and has the divider paper with a pretty cool graphic!

RSS

Photos

  • Add Photos
  • View All

Forum

1964 Cadillac Deville Neutral Safety switch and Oil Filter Housing Assembly

Started by Michael Monson in Wanted to Buy. Last reply by Russ Austin 9 hours ago. 1 Reply

Hello, possibly looking a neutral safety switch for a 1964 Deville with the TH-400 and tilt steering.  Also, possibly looking for an oil filter housing assembly for a 1964 429 motor.  Starting to get…Continue

A Shout Out to Alan Grist & Some Pictures of His 1964 Series 62 4W Sedan

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari 12 hours ago. 2 Replies

As they say, Better Late Than Never!I want to give a shout out to 63/64 Chapter Member Alan Grist, who brought his 64 Series 62 Four Window Sedan, to the 2025 CLC Winter Board Meeting in Chattanooga,…Continue

1963 AC evaporator core leaking?

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 22 hours ago. 1 Reply

Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue

Tags: 1963, core, evaporator, AC

Interior Ideas?

Started by Karl Schwarz in 1963/64 Cadillac Specific Discussion 23 hours ago. 0 Replies

I have a 1963 Series 62 convertible that I'm going to have the interior redone on. The car is Matador Red with a black interior. I'm looking to make the interior pop a little more than it does with…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 13 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service