About ten years ago I had new floors welded in and got my car back with a short. My windows had stopped working and my mechanic jumped the wiring to get them working again. The wiring was only taped together so I'm trying to fix it properly now. He connected the red wire to the white wire with the black stripe. When I tried putting the red wire back to only the red and the white/black to the white/black my window switch won't work at all. Is this a relay issue or does anybody have any ideas? (My mechanic used a blue wire extension to splice it back together so please ignore that wire).

Views: 168

Attachments:

Reply to This

Replies to This Discussion

I don't have a 64 but according to the wiring diagrams you can find in "Help - Wiring & Electrical Schematics and Pictures" it looks like the white/black wire and red wire route through the cutout switch used in 64. Seems like it was wired to bypass the cutout switch.Problem may be in the switch or switch position.

That might be it. The way it was wired up, the switches were always live. I took the cutout switch apart and it does have some corrosion. I'll clean it up and put it back together and see if that will get the window switch working the correct way again with the wires hooked back up the right way.

Also check out the condition of all the wires in the door jamb.These wires are prone to breaking since they flex every time the door is opened & closed

About 90% of the wires in the door jamb are broken and were electrical taped over. They still somehow worked with the red jumped to the white and black wire. I'm using watertight heat-shrink butt connectors on the broken wires and see how that holds up until I can replace them all eventually.

that's what was wrong w mine when my windows went wonky, I lulled that rubber boot out, undid the tape, and they had all been cut and rewired to gather and then pulled apart.   I had to cut them back and rewire them together,  one of my few, electrical successes on my part

Fingers crossed that it works for my car as well once I get the emergency switch back in.

Hey Tony, yes I will be putting everything back to the correct locations. I've taken the emergency switch apart and am using a rust removing gel to get everything all cleaned up. The switch had some broken tabs that stuck out from the sides, which I used JB Weld Stik to repair so hopefully that'll hold up. It might just be a crummy connection with the crimp connectors, but I'll keep messing with it until I get it right.

Also it looks like the fuses are all good. The power seat switch still works as well. Just no windows at all from any switches at the moment.

UPDATE - rebuilding the emergency switch and redoing (for about the 3rd or 4th time) the white wire with the black stripe seems to have worked. Everything is hooked back up to the factory locations and the switches all around the car are working. Just need to get the power vent windows working. Can hear them trying to move. Will let y'all know what happens after I finish fixing the rest of the wires.

Good deal! If you can hear the power vents trying to move, they are getting power. Unfortunately the factory gears are made of aluminum and they tend to strip out over time. Replacement steel gears are availble from Hydo Electric (https://www.hydroe.com/power-vent-window-gears-pair/). It's a fairly easy job to replace them but you do have to take the motor/regulator out of the doors of course. I converted my car to power vents last year. One motor worked, the other had a stripped gear. I went ahead and replaced both gears with steel. These should last longer than me.

RSS

Photos

  • Add Photos
  • View All

Forum

Transmission questions

Started by James Fraschieri in 1963/64 Cadillac Specific Discussion. Last reply by James Fraschieri 4 hours ago. 4 Replies

Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have…Continue

Sneak Peak at our Next Newsletter Feature - Roy Brosi's 1963 Convertible & 1964 Airstream

Started by Jason Edge in Newsletters. Last reply by Dennis P. DiBari 5 hours ago. 1 Reply

I have been slowly plugging away at our next newsletter which will feature Roy Brosi's 1963 Convertible and his 1964 Airstream Camper and thought I would give you all a "Sneak Peek" at our next…Continue

WTS 1964 Sedan Deville w/all options 20k

Started by Tim in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune 22 hours ago. 2 Replies

1964 Sedan Deville with the original 429 engine and TH400 transmission. Engine has approximately 91k miles on the odometer and runs very well. I've replaced the plugs with NOS AC44 plugs, replaced…Continue

Show Your Vintage, Antique or Personalized License Plate!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by C. Van Tune 23 hours ago. 4 Replies

I recently brought in an original, unrestored 1963 Indiana license plate…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service