I'm a new owner of a beautiful survivor 64 Sedan Deville. Shes missing a bolt on the back lower passenger side exhaust manifold. I was told by the seller its a unique bolt? I'd like to try and fix it by next weekend as she does the put put under acceleration. Any help or ways to point me to the correct part are greatly appreciated!
Tags:
The 12 factory exhaust manifold to cylinder head bolts has a 9/16" hex head, thread is 7/16x14. The two left driver side rear bolts are 1 1/2” long & others are 2 1/4” long. The bolt shank size (7/16"x14) is a common size and you can find bolts with this thread at hardware stores but that 9/16" hex head is smaller than the standard 5/8" hex head found on most 9/16" bolts. I have plenty of the longer original 2 1/4" long bolts and like the one missing on your passenger side.
I sell that bolt in very good condition for $3 each, which drops to $2.25 with 25% Chapter discount. If interested email me at jasonedge64@outlook.com. If keeping the exact bolt head appearance is not important, you can find the 7/16"-14, 2 1/4" long bolts at places like www.boltdepot.com. You just want to make sure you get the Grade 5 or Grade 8 (preferred), hardened bolt. I am showing the bolt depot price of $1.39. Click Here to check it out. You may also be able to find the bolt at the local hardware and home improvement stores. Again, if you want the exact original bolt I have it.
You can order an new aftermarket Grade 8 thru Bolt Depot (or perhaps find at local hardware store), or shoot me an email and I will give you a total with shipping and I can have one shipped Priority as soon as tomorrow.
The gasket is probably burned through. I have copper gaskets that will not burn through or soften up.
Please email me at russ@thecadishack.com
Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Tuesday. 1 Reply 0 Likes
My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue
Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies 0 Likes
Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue
Started by Doug Scarrow in For Sale on Sunday. 0 Replies 0 Likes
just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue
Started by Doug Scarrow in For Sale on Saturday. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by