over the last 6 months, I have noticed on my head lights, with the eye thing disengaged. when I run my brights, they seem to run fine, clicking back and forth to low and high, its fine. then, after about 10 minutes, it goes from bright to dim, on its own, no oncoming traffic, just clicks to low. and wont allow a return to bright, I can hit it, and it will click to bright but immediately go back to dim. if I run at dim for 10 minutes or so, I can then go back to bright, and it will stay bright for 5 or so minutes, then it goes back to switching to low. its almost as if something is getting hot, then, when I let it cool (on low), it will allow me to go back to bright.
the eye wires are all disengaged from under the dash, any idea where to start to look at this..
Happy New Year to all,,
Tags:
Started by Stephen Pechenik in Restoration Discussion. Last reply by Linda M. Brooks 10 hours ago. 3 Replies 0 Likes
I am readying my Fleetwood to be painted. I need to replace the driver's side left chrome eyebrow molding (below the headlights). It appears to be made from pot metal. Mine is broken and I need to…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
Hi everyone I would like to know dose anybody here have a tissue holder fitted to their car if so could you please send me a picture of it thanks in advance Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
CLC Membership dues are going up April 1. Join or Renew between now and March 31 and save! You can even renew with current rates for up to 3 years!Here is a breakdown of the rate increases Effective…Continue
Started by Jason Edge in Chapter Discussion on Friday. 0 Replies 0 Likes
Here is a breakdown of the rate increases Effective April 1:E-membership…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
February 15, 2026 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2026 Created by Jason Edge.
Powered by