Coolant hose for 1963 Sedan Deville Park Ave Without A/C
There is a short hose on the top of the motor that connects from a straight pipe on the top of the engine to the water pump. It appears to be a molded hose. I have ordered a master parts book which has not yet arrived. Does anyone know where I could find a new one (before I am forced to fashion some sort of solution)?
The hose is too short to bend heater hose without kinking it. The bend is about 70 degrees, which makes me suspect that heater hose + a 90 degree elbow will also kink.
Thank you.
Stephen Pechenik
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
I have return pipe to water pump hoses, the short fat hose with the tight bend, new ready to ship for $15 + s/h. Shoot me an email to jasonedge@nc.rr.com
Photos
Members
Forum
Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets
Started by Jason Edge in General Discussion. Last reply by Jason Edge 9 hours ago. 6 Replies 0 Likes
Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt…Continue
Anyone Ever Hear of or Use Gary's Steering Wheels
Started by Jason Edge in Restoration Discussion. Last reply by Dennis P. DiBari yesterday. 2 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Dino Diaries - All Jacked Up For Christmas!
Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 4 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Dino Diaries - Turbo HydraMatic Starter Bolts Replaced
Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
-
February 16, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2025 Created by Jason Edge.
Powered by
