I had a top motor issue due the resevoir being topped up by an upholstery guy with a fluid that was not compatible with the fluid already in the pump. The mixed fluid turned to foam after one going up once and could not lift the top back up. I removed the pump. How do I clean out the old fluid in the rubber hoses going to either side of the pomp? They seem to be mostly empty now but don't want to have nay more foaming issues. WHAT IS THE IDEAL HYDRAULIC FLUID TO USE IN THE MOTOR? The foaming started after Dot 3 was added to the half filled reservoir I see CHF 11S on the Advance Auto site. I also see Pentofluid EHF online as being for Top Motors. What might you recommend? John at juancull@aol.com
Tags:
See this post: https://6364cadillac.ning.com/forum/topics/1964-convertible-top-ope...
Looks like it would be either brake fluid or transmission fluid. Based on what you reported, you probably had transmission fluid originally but I'm no expert on this topic.
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 6 hours ago. 1 Reply 0 Likes
A Big Shout Out to Robert Kirnard, 1963-64 Cadillac Chapter Member, who just picked up this super clean and great running 49K Mile 1964 Fleetwood 60 Special. He drove it to our Carolina Region CLC…Continue
Started by Christian Doerk in General Discussion. Last reply by Chris McBride 10 hours ago. 1 Reply 0 Likes
Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk yesterday. 18 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by