So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out that the back up light worked before I started this journey. I was trying to get the plug out from under the license plate and probably unknowingly partial removed it! 
Then on Sunday’s zoom meeting Pat recommended pulling the plug by the plate. Of course I zeroed in on the bulb and sweated over getting the lenses and cross piece out! Finally got the screws that hold the cross piece out, one by pure strength and PB Blaster, the other by using a removal  bit and basically grinding off the bolt head. Then replaced the bulb and tested it and nothing! THEN it hits me about the plug and cleaning the corrosion off the tabs. Sure enough, put the plug on the clean tabs and BAM everything worked!

- Pat you’re a gosh darn genius!

A couple of lessons here, obvious one is when Pat suggests something do it! And second, always do the easy stuff first!

Views: 145

Reply to This

Replies to This Discussion

Dave,

     Great work and Pat hit it on the nose!!!  Glad to hear it worked out well!

Dennis DiBari

Dave. Glad you got your car working again. Thank you for the compliment and it’s actually experience more than anything else. 

RSS

Photos

  • Add Photos
  • View All

Forum

No AC 1963 Eldorado Unique Dash End Panels

Started by Jason Edge in General Discussion on Sunday. 0 Replies

As I was documenting the non-AC 63 Eldorado parts car I bought in a couple months ago, the solid panel dash end panels intrigued me and thought I would share a couple of pictures and thoughts. First,…Continue

For Sale - Fresh Chrome 1963 Series 62 Conv/CDV/Eldorado door panel chrome bezels

Started by Anthony Vanacore in For Sale. Last reply by Jason Edge on Sunday. 4 Replies

Hello,My father and I are restoring our 63 series 62 conv, we had the chrome bezels for the window/seat switches rechromed.  During this process we also installed factory power door locks to the…Continue

WTB 63 Series 62 Original Trunk Material

Started by Anthony Vanacore in Wanted to Buy. Last reply by Russ Austin on Friday. 1 Reply

Hello,I am looking for an original trunk for a series 62 convertible.  Condition does not need to be perfect and does not need to be complete, I am looking for a set that I can use as a template. I…Continue

Parts to replace Power Brake and Master Cylinder for 1964 Eldorado

Started by Remco Waller in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Apr 27. 1 Reply

I have a 1964 Eldorado and based on paperwork received with the purchase the Power Brake unit & master Cylinder were never replaced. The brakes are working currently well but as pre-caution I…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service